• 姓名: 王德志
  • 职称: 教授
  • 学位: 博士
  • 中南大学
  • 材料科学与工程学院
教育背景

1991年毕业于原中南工业大学材料系金属塑性加工专业

1994年获工学硕士学位

1998年获工学博士学位

工作经历

1998.6于原长沙铁道学院机电工程学院任讲师、2000.5任副教授;

2002.7于中南大学材料科学与工程学院任副教授、2005.9任教授;

2005年陕西省金堆城钼业集团有限公司博士后工作站出站。

学术兼职
《中国钼业》编委,中国有色金属学会稀有金属冶金学术委员会委员。
教授课程
金属材料压力加工、材料科学与工程方法论。
科研项目
近几年作为项目负责人和主要完成者曾多次承担了国家、省部级科研课题,其中“863”计划项目3项,国家自然科学基金项目2项,湖南省科技厅科技计划项目2项,其它横向项目多项。
论文专著

国内外发表学术论文80余篇,出版教材、著作3部。

1. Interface of Mo–Cu laminated composites by solid-state bonding, International Journal of Refractory Metals and Hard Materials, Volume 51, July 2015, Pages 239-242

2. Tungsten carbide hollow microspheres as electrocatalyst and platinum support for hydrogen evolution reaction, International Journal of Hydrogen Energy, Volume 40, Issue 8, 2 March 2015, Pages 3229-3237

3. Microwave-assisted synthesis of Mo–Cu nano-powders at an ultra-low temperature and their sintering properties, Materials Chemistry and Physics, Volume 148, Issue 3, 15 December 2014, Pages 494-498

4. Influence of packing density on performance of porous wick for LHP, Powder Technology, Volume 258, May 2014, Pages 6-10

5. Hydrothermal synthesis of MoS2 nanoflowers as highly efficient hydrogen evolution reaction catalysts, Journal of Power Sources, Volume 264, 15 October 2014, Pages 229-234

6. Effect of W addition on the hydrodeoxygenation of 4-methylphenol over unsupported NiMo sulfide catalysts, Applied Catalysis A: General, Volume 476, 22 April 2014, Pages 61-67

7. Fabrication of Mo–Cu composites by a diffusion-rolling procedure, International Journal of Refractory Metals and Hard Materials, Volume 43, March 2014, Pages 121-124

8. The sintering behavior of ultra-fine Mo–Cu composite powders and the sintering properties of the composite compacts, International Journal of Refractory Metals and Hard Materials, Volume 42, January 2014, Pages 240-245

9. Preparation and characterization of MoSi2/MoB composite coating on Mo substrate, Journal of Alloys and Compounds, Volume 589, 15 March 2014, Pages 384-388

10. Preparation and characterization of molybdenum disilicide coating on molybdenum substrate by air plasma spraying, Applied Surface Science, Volume 284, 1 November 2013, Pages 881-888

11. Distorted MoS2 nanostructures: An efficient catalyst for the electrochemical hydrogen evolution reaction, Electrochemistry Communications, Volume 34, September 2013, Pages 219-222

12. Synthesis of novel core–shell Cu@Mo nanoparticles with good sinterability, Journal of Alloys and Compounds, Volume 555, 5 April 2013, Pages 6-9

13. The effect of nickel content on the hydrodeoxygenation of 4-methylphenol over unsupported NiMoW sulfide catalysts, Catalysis Communications, Volume 32, 5 February 2013, Pages 76-80

14. Preparation and characterization of sintered molybdenum doped with MoSi2/La2O3/Y2O3 composite particle, Materials Science and Engineering: A, Volume 558, 15 December 2012, Pages 497-501

15. Microstructure and properties of hot-rolled 2.0 wt.% MoSi2/rare earth oxide doped molybdenum alloys, International Journal of Refractory Metals and Hard Materials, Volume 31, March 2012, Pages 152-156

16. WS2 nanosheets as a highly efficient electrocatalyst for hydrogen evolution reaction, Applied Catalysis B: Environmental, Volume 125, 21 August 2012, Pages 59-66

17. Ultrasonic-assisted preparation of metastable hexagonal MoO3 nanorods and their transformation to microbelts, Ultrasonics Sonochemistry, Volume 18, Issue 1, January 2011, Pages 288-292

18. Mechanochemical synthesis of Mo–Cu nanocomposite powders, Journal of Alloys and Compounds, Volume 509, Issue 5, 3 February 2011, Pages L74-L77

19. Synthesis of ultra-fine Mo–Cu nanocomposites by coreduction of mechanical-activated CuMoO4–MoO3 mixtures at low temperature, Journal of Alloys and Compounds, Volume 505, Issue 2, 3 September 2010, Pages 588-591

20. Synthesis of WS2 nanosheets by a novel mechanical activation method, Materials Letters, Volume 64, Issue 7, 15 April 2010, Pages 856-858

专利成果

申请国家发明专利8项,授权6项。

1. 一种制备复合纳米微粒强韧化烧结钼材料的方法(200810143139.6)

2. 一种电真空器件内电磁屏蔽多层复合材料(201110063177.2)

3. 一种应用热膨胀差量的热压加工方法(201110314102.7)

4. 一种低温还原制备纳米钼铜复合粉的方法(201210453461.5)

5. 一种叠层法同步冷轧铁箔的制备方法(201210193485.1)

奖励/荣誉

2005.12 中南大学陈新民奖励基金年轻优秀教师奖;

2005.10 湖南省科技进步三等奖;

2005.7 中南大学优秀班导师;

2004.12 中南大学优秀在站博士后;

2003.12 中南大学研究生教学质量优秀奖;

2002.10 湖南省第九届自然科学优秀论文叁等奖;

2002.5中南大学青年岗位能手;

2001.12 中南大学首届青年教师教学竞赛教案十佳。