中国材料研究学会理事

先后主持和参与了国家重大专项、973子项目、国家自然科学基金、国家科技支撑计划、国家高技术研究发展计划(“863”计划)、国防科工委、科技部和教育部重点项目、广东省产学研重大专项等二十多项。

1、轻质难熔金属材料使用行为及性能研究

2、废杂铜环保利用与再生关键技术及装备研究

3、高性能轨控发动机XX用高温涂层

4、超细晶硬质合金及数控涂层刀片关键技术研发和产业化

目前已在国内外材料领域知名杂志发表80余篇，其中40余篇被 SCI、EI等著名检索工具检索 参与编写专著2本。

1、X J Zhao,L Guo,Z Y Cai,L R Xiao*, et. al.SiC and ZrN Nano-Particulate Reinforced ALON Composite;Preparation,Mechanical Properties and Toughening Mechanisms, Ceramics International, 2015, Accepted.

2、Y H Wang, L R Xiao*, X J Zhao, et. al. Microstructure and mechanical properties of columnar-grained copper during cold-drawing, Materials Science and Engineering A, 2015, Accepted.

3、 Y F Song, L R Xiao*, X J Zhao, et al. Fabrication, microstructure and shear properties of Al foam sandwich. Materials and Manufacturing Processes, 2015, Accepted.

4、 X J Zhao, L R Xiao*, Z W Zhao, et. al. Fabrication and mechanical properties of silicon carbide-aluminum oxynitride nanocomposites, Ceramics International, 2014, 40 (9): 14295-14303.

5、Y H Wang, L R Xiao*, X J Zhao, et. al. Corrosion behavior of Zn-Cu-Ti and Zn-Cu-Ti-Mg alloys in NaCl solution, Materials and Corrosion, 2015, Accepted.

6、H. J. Mao, P. X. Miao, J. Z. Cong, L R Xiao*et al. Interface-modification-enhanced tunnel electroresistance in multiferroic tunnel junctions. Journal of Applied Physics, 2014,. 116, 053703 .

7、 H J Mao, C Song, B Cui, G Y Wang, L R Xiao, F Pan. Room temperature spontaneous exchange bias in (La,Sr)MnO3/PbZr0.8Ti0.2O3/(La,Sr)MnO3 sandwich structure， Journal of Applied Physics, 2013, 114: 043904.

8、L R Xiao,J F Huang, Y L Chen,et al. Phase equilibria of the Zn–Al–Ti system at 370°C in the Zn-rich region，International Journal of Materials Research,2013,104(9):843-848

9、J Li, Y R Wang, J Y Dai, L R Xiao, et al. The effects of solid-solution on properties and microstructure of Cu-Zn-Al-Ni alloy, Applied Mechanics and Materials, 2012, 159: 361-365.

10、 J Q Hou, L R Xiao*, L Guo, et. al. The preparation and growth mechanism of Ni-coated TiH2 composite powder by electroless plating， Materials Science Forum, 2012, 743: 353-359.

11、 L R Xiao*, X M Zhang, Y Wang, et. al. High temperature creep behavior of Zn-1.0Cu-0.2Ti alloy, Advanced Materials Research, 2011, 287: 769-776.

申请国家发明专利15项，获国家发明专利授权12项。

1、铌合金高温抗氧化硅化物涂层及其制备方法, CN 100540744C.

2、一种无铅易切削镁黄铜合金及其制备方法，CN 100552070C.

3、 一种含Mn的抗蠕变轧制锌合金板带材及其制备方法，CN 101906555 B.

4、一种含Cr的抗蠕变挤压锌合金及其制备方法，CN 101914704 B.

5、一种泡沫铝三明治结构材料的制备方法

6、一种高强弹性黄铜及其制备方法

获国家和省部级奖励6项，获国家教学成果二等奖1项，省教学成果一等奖2项，中国有色金属工业科技进步一等奖1项，省部科技进步二等奖1项，省部级科技进步三等奖1项。

1、替代含铅易切削黄铜合金材料系列产品开发关键技术与产业，省部科技进步奖，三等奖

2、替代含镉材料的关键技术及应用，有色金属工业科学技术奖，一等奖

3、国家教学成果奖，二等奖

4、省部级教学成果奖，一等奖，2项