相关研究成果发表学术论文50余篇,其中包括国外学术刊物: Corrosion Science、J. Alloys and Comp、Mater. Sci. Eng. A、Material Charact.等。
近年来以第一作者或通讯作者公开发表的部分论文:
[1] Excellent high strain rate superplasticity of Al-Mg-Sc-Zr alloy sheet produced by an improved asymmetrical rolling process, Journal of Alloys and Compounds, 715 (2017) 311-321
[2] Research on Constitutive Models and Hot Workability of As-Homogenized Al-Zn-Mg-Cu Alloy during Isothermal Compression. Metals and Materials International,Vol. 23, (2017),No. 3 ,591-602
[3] Mechanical properties, corrosion behavior and microstructures of a nonisothermal ageing treated Al-Zn-Mg-Cu alloy. Materials Science & Engineering A, A688(2017)146-154
[4] Nano-structure evolution of secondary Al3(Sc1-xZrx) particles during superplastic deformation and their effects on deformation mechanism in Al-Zn-Mg alloys. Journal of Alloys and Compounds, 695 (2017) 142-153
[5] Study on Hot Workability of Al-5.87Zn-2.07Mg-2.28Cu Alloy Using Processing Map. JOM(Journal of the Minerals, Metals and Materials Society), Vol. 69(2017), No.4,725-733
[6] Achieving high strain rate superplasticity of an Al-Mg-Sc-Zr alloy by a new asymmetrical rolling technology. Materials Science & Engineering A, A672(2016)98–107
[7] Synergetic effects of Sc and Zr microalloying and heat treatment on mechanical properties and exfoliation corrosion behavior of Al-Mg-Mn alloys. Materials Science & Engineering A, 666(2016)
[8] Superplastic behavior and microstructure evolution of a new Al-Mg-Sc-Zr alloy subjected to a simple thermomechanical processing. Materials Science & Engineering A, A669(2016)205–217
[9] Effect of Sc and Er additions on superplastic ductilities in Al-Mg-Mn-Zr alloy. Journal of Central South University 23(2016) 1283-1292
[10] Mechanical Properties and Microstructure of TIG and FSW Joints of a New Al-Mg-Mn-Sc-Zr Alloy. Journal of Materials Engineering and Performance,25 (2016) 1249-1256
[11] Mechanical Properties, Corrosion Behavior, and Microstructures of a MIG-Welded 7020 Al Alloy. Journal of Materials Engineering and Performance, 25 (2016) 1028-1040
[12] Microstructure and mechanical properties of 7005 aluminum alloy processed by room temperature ECAP and subsequent annealing. Journal of Alloys and Compounds, 664 (2016) 518-529
[13] Stress measurement at the interface between a Si substrate and diamond-like carbon/Cr/W films by the electronic backscatter diffraction method. Applied Physics Express, 9 (2016) 025504
[14] Stress corrosion cracking of a high-strength friction-stir-welded joint of an Al-Zn-Mg-Zr alloy containing 0.25 wt% Sc. Corrosion Science,639(2015) 500-513
[15] Achieving high superplasticity of a traditional thermal-mechanical processed non-superplastic Al-Zn-Mg alloy sheet by low Sc additions. Journal of Alloys and Compounds, 638(2015) 364-373
[16] Microstructure and properties of the novel Cu–0.30Mg–0.05Ce alloy processed by equal channel angular pressing. Materials Science & Engineering A, 648 (2015) 252-259
[17] Achieving high superplasticity of a new Al-Mg-Sc-Zr alloy sheet prepared by a simple thermal-mechanical process. Materials Science & Engineering A, 647 (2015) 333-243
[18] Effects of Sc and Zr on mechanical property and microstructure of tungsten inert gas and friction stir welded aerospace high strength Al–Zn–Mg alloys. Materials Science & Engineering A, 639 (2015) 500-513
[19] Excellent superplasticity and deformation mechanism of Al–Mg–Sc–Zr alloy processed via simple free forging. Materials Science & Engineering A, 624(2015) 124–131
[20] Corrosion behaviour and mechanism of new aerospace Al-Zn-Mg alloy friction stir welded joints and the effects of secondary Al3ScxZr1-x nanoparticles. Corrosion Science, 90(2015) 359-374
[21] {C} Preparation and characterization of ZnSe/CdSe core-shell microspheres. Transactions of Nonferrous Metals Society of China, 25(2015) 1559-1567
[22] Characterization of ZnSe microspheres synthesized under different hydrothermal conditions[J]. Transactions of Nonferrous Metals Society of China, 24(2014) 2588-2597
[23] Tungsten Inert Gas and Friction Stir Welding Characteristics of 4-mm-Thick 2219-T87 Plates at Room Temperature and −196 °C. Journal of Materials Engineering and performance, 23(2014) 2149-2158
[24] Effects of Sc and Zr microalloying additions on the recrystallization, texture and mechanism of Al–Zn–Mg alloys. Journal of Alloys and Compounds, 580(2013) 412-426
[25] EBSD characterization of twinning in cold-rolled CP-Ti. Materials characterization, 84(2013) 41-47
[26] Dependence of twinning on matrix orientation in tensile deformed commercial purity titanium. Materials Science and Technology, 29(2013) 754-758
[27] Constitutive relationship for high temperature deformation of Al-3Cu-0.5Sc alloy. Transactions of Nonferrous Metals Society of China, 23(2013) 1549−1555